Maximator India

up to 4,500 bar (65,250 psi) G...D series

Maximator pumps of the G series are available in double-acting design with one air drive piston.
The maximum air drive pressure is 10 bar (145 psi).

Features high pressure pumps G...D series

The unregulated pilot port on all G pumps not only provides better pressure control but can be used for switching the pump on and off via solenoid valves with small nominal size.

Double acting
single air drive head
For operating pressures up to 4,500 bar (65,250 psi)

G...D pumps are double acting, single air drive head. They are characterized by the same features as the G pumps single acting, single air drive head types, but they have less pulsations and deliver approx. 50 % more flow.

G...D pumps are available with polyurethane seals, UHMWPE seals with FKM O-ring for water use are available as option. Models G10D – G35D come standard with bottom inlet, side inlet is available as option. Models G60D(S) – G150D(S) are only available with side inlet.

Options for G...D series

Seal material for oil use (standard pump): Order code: G35D – (L)
Seal material for water use: Order code: G35D – VE
Special seal material to handle special fluids: Order code: See fluid compatibility guide
Side inlet (G60D – G150D come standard with side inlet) Order code: G35(D)VE – S
Special inlet and outlet ports (i. e. NPT): G35D – NPT
Air control unit for G...D series with filter pressure regulator, control pressure gauge and shut-off valve: Order code: G35D with C2
To protect the pump against excessive outlet pressures, an air safety valve can be fitted to the air control unit: Order code: G35D with C2/SVair (The outlet pressure has to be indicated.)

Other option is available on request